How to Mount Scope on S&W M&P 22

If you’re looking to add a scope to your S&W M&P 22, there are a few things you’ll need to do to get it set up properly. First, you’ll need to remove the factory sight. This is easily done by removing the screws that hold it in place.

Once the sight is off, you’ll need to decide which mount you want to use. There are a few different options available, so make sure you pick one that will work with your particular setup. Once you have your mount, simply follow the instructions that come with it to get it installed properly.

With the mount in place, all that’s left is to attach your scope and make any necessary adjustments.

  • Unscrew the two screws on the top of the gun, just above the barrels
  • Carefully remove the top half of the gun, being careful not to lose any small parts
  • Take your scope and line up the holes on the top of it with the holes on the top of the gun
  • Screw in the provided screws until they are snug, but be careful not to over-tighten them
  • Replace the top half of the gun and screw it back into place


What is the Best Way to Mount a Scope on an S&W M&P 22

If you’re looking to add a scope to your S&W M&P 22, there are a few things you’ll need to take into consideration. First, you’ll need to decide which style of scope mount you prefer. There are two main types of mounts: weaver/picatinny and dovetail.

Weaver/picatinny mounts are the most popular type of scope mount because they offer a lot of versatility. Dovetail mounts are also popular, but they’re not as easily adjustable as weaver/picatinny mounts. Once you’ve decided on a mount, you’ll need to choose the right size for your scope.

The size of the tube on your scope will dictate what size mount you need. Most S&W M&P 22s have 3/8″ or 11mm dovetails, so that’s the size mount you’ll need to look for. If you’re unsure about the size of your dovetail, it’s always best to err on the side of caution and go with a slightly larger mount (such as 1″ or 30mm). Now that you know which style and size mount you need, it’s time to install it!

Installing a picatinny rail is relatively easy – simply line up the rail with the bases on your firearm and screw it in place using the provided screws. For dovetail mounts, you’ll first need to remove the rear sight before installation. Once the sight is removed, align the base of the mount with the dovetail cuts on your firearm and tap it into place using a mallet or other blunt object.

With either type of mount, be sure not tighten any screws until everything is lined up correctly – otherwise you risk damaging your firearm or scope. And that’s all there is to mounting a scope on an S&W M&P 22! With just a few simple steps, you can add this valuable piece of equipment to your firearm and take your shooting game to the next level.

How to Mount Scope on S&W M&P 22


M&P 15-22 Scope Or Red Dot

An M&P 15-22 scope or red dot is a great way to improve your accuracy when shooting your M&P 15-22. A scope will help you see your target better and make it easier to hit, while a red dot will allow you to shoot without having to line up your sights. Either way, adding one of these accessories to your gun will help you become a better shooter.


In this blog post, the author gives a step-by-step guide on how to mount a scope on a Smith & Wesson M&P 22. The author begins by discussing the various tools and supplies needed for the job. Next, the author walks readers through each step of the process, from attaching the base to aligning the scope.

Throughout the post, the author includes helpful tips and photos to illustrate each step. By following this guide, anyone can successfully install a scope on their S&W M&P 22.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top