How To Mount Scope On Mosin Nagant 91/30

The Mosin Nagant 91/30 is a bolt-action rifle that was used by the Soviet Union during World War II. The rifle was designed by Sergei Mosin and Leon Nagant, and it was first produced in 1891. The 91/30 was the standard rifle of the Soviet Union from 1930 to 1945, and it was used by Soviet soldiers during the Battle of Stalingrad and the Battle of Kursk. More than 17 million 91/30 rifles were produced, and they were used by militaries around the world. The 91/30 is still used by militaries and collectors today.

To disassemble the mount scope on a mosin nagant 91/30, first remove the screws that hold the scope in place. Next, remove the scope from the mount. Finally, unscrew the mount from the gun.

To mount a scope on a Mosin Nagant 91/30, unscrew the two screws on the side of the mount using a Phillips head screwdriver. Then, slide the mount onto the rail on the top of the receiver. Finally, screw the mount into place using the screws that were removed earlier.

To remove the old mount from the side of the rifle, first remove the screws that hold it in place. Then, using a flathead screwdriver, pry the old mount off of the side of the rifle. Be careful not to damage the side of the rifle in the process.

To mount a scope on a Mosin Nagant 91/30, first remove the old mount from the side of the rifle. Next, place the new mount in the same location as the old mount. Finally, secure the mount to the rifle with the provided screws.

To mount a scope on your Mosin Nagant 91/30, first remove the rear sight leaf spring and the rear sight base. Next, remove the two screws that hold the front sight in place. Now, take the new mount and screw it into place using a Phillips head screwdriver. Once the mount is in place, you can now attach your scope. Start by attaching the rings to the scope, and then attach the rings to the mount. Make sure that the scope is level, and then tighten all the screws. Your scope is now mounted on your Mosin Nagant 91/30!

To mount a scope onto a Mosin Nagant 91/30, first remove the dust cover and rear sight leaf. Next, unscrew and remove the receiver cover plate. Then, slide the scope mount onto the receiver, making sure that the mount is properly aligned. After that, screw the mount into place using the provided screws. Finally, reattach the receiver cover plate and dust cover.

To properly mount a scope on a Mosin Nagant 91/30, first make sure the scope is the correct size and model for the gun. Place the scope base on the rear sight dovetail and use the supplied screws to attach it. Finally, reattach the dust cover and bolt handle. The scope should now be in the correct position for use.

The mount scope on mosin nagant 91/30 is a device that is used to attach a scope to the rifle.

There are a few different ways to mount a scope on a mosin nagant 91/30. One popular method is to use a scout mount, which attaches to the side of the receiver. Another option is to use a clamp-on mount that goes over the barrel. Whichever method you choose, make sure that the mount is securely attached and that the scope is properly aligned before firing the rifle.

Some of the most popular options include red dot sights, holographic sights, and traditional telescopic sights. Each type of scope has its own advantages and disadvantages, so it is important to choose the one that best suits your needs.

Some benefits of mounting a scope on a Mosin Nagant 91/30 include increased accuracy, longer range, and the ability to see targets more clearly. A scope can also help you shoot in low light conditions.

1. First, you will need to remove the rear sight leaf and the corresponding elevator.

2. Next, you will need to drill and tap two holes in the receiver for the scope mount screws.

3. Once the holes are drilled and tapped, you can now mount the scope base of your choice.

4. After the scope base is mounted, you can now install the rings and scope of your choice.

5. Finally, you will need to sight in your scope.

When mounting a scope on a Mosin Nagant 91/30, it is important to take caution. The reason being is that the Mosin Nagant 91/30 is a very old rifle. The design of the rifle has not changed much since it was first created, meaning that the scope mounts are not always the best fit. If not mounted correctly, the scope can easily become loose and fall off. This could damage the scope and/or the rifle. It is important to make sure that the scope is mounted correctly and securely before using the rifle.

The Mosin Nagant 91/30 is a great rifle for anyone looking for a reliable and affordable option. The scope is easy to mount and the rifle is accurate and fun to shoot. I would recommend this rifle to anyone looking for a good value.