There are many reasons why it is important to mount a scope on an 870. One of the most important reasons is that it increases the accuracy of the gun. A scope allows the user to see their target more clearly and make more precise shots. Additionally, a scope can help the user to shoot at longer distances more effectively.
Another reason why it is important to mount a scope on an 870 is that it can help to make the gun more versatile. A scope can allow the user to use the gun for different purposes such as hunting or target practice. Overall, mounting a scope on an 870 can be a very beneficial upgrade that can make the gun more accurate and versatile.
Tools You May Use
Let’s Know Disassembly Process
To disassemble an 870, you’ll need a few tools: a drill, a tap set, a set of Allen wrenches, and a Phillips screwdriver. You’ll also need a scope base and rings. First, remove the magazine cap and fore-end from the 870. Next, drill and tap two holes in the receiver, using the provided template as a guide. Then, attach the scope base to the receiver using the provided screws. Finally, attach the rings to the base and mount the scope.
Let’s Discuss Step by Step process of Mounting A Scope On An 870
1. Unload your gun and make sure it is pointing in a safe direction.
To mount a scope on an 870 shotgun, first make sure the gun is unloaded and pointing in a safe direction. Then, attach the scope to the gun using the proper mounting hardware. Once the scope is attached, sight in the scope by adjusting the elevation and windage screws until the crosshairs are aligned with the point of impact.
2. Take off the barrel cap and remove the barrel from the receiver.
To remove the barrel from the receiver, start by taking off the barrel cap. With the cap off, you should be able to pull the barrel straight out of the receiver. Once the barrel is removed, you can proceed with mounting your scope.
3. Place the scope base on the receiver.
It is important to first place the scope base on the receiver. This will ensure that the scope is properly aligned with the bore of the shotgun. Next, use the provided screws to secure the base to the receiver. Finally, attach the rings to the base, and then mount the scope to the rings.
4. Screw in the scope base screws.
To attach a scope to your 870, you will need to first screw in the scope base screws. These screws will be located at the top of the receiver, and they will be used to hold the scope base in place. Once the screws are in, you will then need to attach the scope rings to the base. After the rings are in place, you can then mount the scope onto the rings. Once the scope is mounted, you can then tighten down the rings to hold the scope in place.
5. Place the barrel back in the receiver and screw on the barrel cap.
To mount a scope on an 870, first remove the barrel and cap. Next, attach the scope base to the receiver using the screws provided. Then, attach the rings to the base and scope. Finally, insert the scope into the rings and tighten the screws.
6. Load your gun and take it to the range to sight in your scope.
To properly sight in your scope, you will need to take your gun to the range. Once you are at the range, load your gun and get into a comfortable position. Next, take aim at your target and fire a few shots. Once you have fired a few shots, take a look at where they landed in relation to your target. If they are not hitting where you are aiming, you will need to make some adjustments to your scope.
To do this, you will need to use the windage and elevation screws on your scope. Once you have made the necessary adjustments, fire a few more shots and check to see where they are landing. Repeat this process until your shots are hitting where you are aiming.
CHEAPEST Scope on Amazon vs 12 g Shotgun
Frequently Asked Questions
How do I mount a scope on an 870?
There are a few different ways to mount a scope on an 870. The most common way is to use a scope mount that attaches to the receiver. Other ways include using a clamp-on mount or a rail that attaches to the barrel.
Can I mount a scope on an 870 myself?
Yes, you can mount a scope on an 870 yourself. There are a few things you need to take into account though. First, make sure the scope is properly aligned with the bore. Second, make sure the scope is properly secured to the gun. Third, make sure you have the proper tools and know-how to do the job.
What type of scope should I use for an 870?
There are many different types of scopes that can be used on an 870, so it really depends on what you are looking for in a scope. If you are looking for a scope to use for hunting, then you might want to consider a scope with a higher magnification.
If you are looking for a scope to use for target shooting, then you might want to consider a scope with a lower magnification. There are also scopes that have different reticles, so you will want to decide what type of reticle you want before you purchase a scope.
How do I sight in a scope on an 870?
There are a few different ways that you can sight in a scope on an 870. One way is to use a bore sighter. This is a tool that you can use to align the scope with the bore of the gun. Another way is to shoot at a target from a distance and make adjustments to the scope until the crosshairs are lined up with the point of impact.
What are some tips for mounting a scope on an 870?
There is no one definitive answer to this question, as there are many different ways to mount a scope on an 870. However, some tips that may be helpful include:
-Making sure that the scope is properly aligned with the gun’s bore
-Using high-quality scope mounts and rings
-Tightening the scope mounts securely
-Using a level to ensure that the scope is mounted level on the gun
-Checking for proper eye relief before shooting
When mounting a scope on an 870, it is important to take caution. The 870 is a recoil-operated shotgun, which means that the scope can become loose over time from the recoil. It is important to check the scope regularly to make sure it is still tight and secured.
When mounting a scope on an 870, it is important to first make sure that the gun is unloaded. Next, you will need to remove the bolt and the magazine tube. Once these are removed, you will be able to access the receiver. At this point, you will need to determine which scope mount you will be using. Once you have determined this, you will need to follow the instructions that come with the mount. Once the mount is in place, you will then need to reassemble the gun.
Hey, This is Ebert Alberts. I’m the sole writer and creator of all the content you’ll find on this site. I’ve been passionate about shooting with scopes, red dot sights, and all kinds of gun optics for years now. And during that time, I’ve learned a lot – often the hard way. I’ve wasted thousands of dollars on scopes that turned out to be duds, and I’ve also found some real gems along the way.