There are many benefits to mounting a scope on a Henry Big Boy. A scope can help you shoot more accurately, see your target better, and make longer shots. A scope can also help you find game in thick brush or low light conditions. If you hunt in areas where there are dangerous animals, a scope can also help you see them before they see you.
Tools You May Use
Let’s Know Disassembly Process
To disassemble a Henry Big Boy, first remove the magazine tube cap and unscrew the barrel band screw. Next, slide the barrel band off of the magazine tube. With the barrel band removed, the magazine tube can now be slid out of the receiver for cleaning. To mount a scope, first remove the magazine tube cap and unscrew the barrel band screw. Next, slide the barrel band off of the magazine tube.
With the barrel band removed, the magazine tube can now be slid out of the receiver. Place the receiver in a vise and use a 1/4″ drill bit to drill two pilot holes through the receiver, just above and in front of the loading gate. Next, use a 3/8″ drill bit to enlarge the holes. Now, use a 1/4-20 tap to thread the holes.
To mount the scope, you will need a set of Weaver #12 bases and a set of 1″ rings. With the bases and rings in hand, line up the bases on the receiver and use a 1/4″ drill bit to drill two pilot holes through the bases and into the receiver. Next, use a 3/8″ drill bit to enlarge the holes. Now, use a 1/4-20 tap to thread the holes. With the holes tapped, you can now mount the bases and rings to the receiver.
Let’s Discuss Step by Step process of Mounting A Scope On A Henry Big Boy
1. Henry Big Boy rifles come with pre-drilled scope mounting holes on the receiver.
Henry Big Boy rifles come with pre-drilled scope mounting holes on the receiver. This makes it easy to mount a scope on your rifle, and gives you the option to use the iron sights that come with the rifle. The receiver is also drilled and tapped for scope mounts, so you can use any standard scope mount that fits your rifle.
2. To mount a scope, first select rings that fit the scope and the rifle.
To mount a scope, select rings that fit the scope and the rifle. The rings should be the right size for the scope and the right size for the rifle. The next step is to attach the rings to the scope. The rings should be attached to the scope using screws. The screws should be tightened until they are snug, but not too tight.
The next step is to attach the scope to the rings. The scope should be attached to the rings using screws. The screws should be tightened until they are snug, but not too tight. The next step is to sight in the scope. The scope should be sighted in at 100 yards. The final step is to test the scope. The scope should be tested at 100 yards.
3. The rings should have a base that attaches to the receiver, and clamps that hold the scope in place.
If you’re looking to mount a scope on your Henry Big Boy, you’ll need a set of rings. The rings should have a base that attaches to the receiver, and clamps that hold the scope in place. Make sure that the rings you choose are the right size for the scope you’re using.
Once you have the rings in place, you can start attaching the scope. First, line up the scope’s mounting holes with the rings. Then, use the screws that come with the rings to attach the scope to the rings. Be careful not to overtighten the screws, as this can damage the scope. Once the scope is mounted, you can make final adjustments to get the perfect sight picture.
4. Once the rings are in place, attach the scope to the rings.
Once the rings are in place, attach the scope to the rings. Make sure the scope is lined up with the bore of the rifle. If it is not, the bullets will not hit the target.
5. Make sure the scope is level, and that the eye relief is comfortable.
Make sure the scope is level. This can be done by using a bubble level. Second, make sure the eye relief is comfortable. This means that when you look through the scope, you should not have to strain your eyes to see the crosshairs. Finally, make sure the scope is mounted securely. The last thing you want is for the scope to come loose and fall off while you are shooting.
6. Once the scope is mounted, you will need to sight it in.
Once the base is in place, you will need to replace the screws. Be sure to snug them down, but don’t overtighten them. Next, you will need to mount the rings. The rings will come with screws. Be sure to use the appropriate size screws. Once the rings are in place, you will need to slide the scope into the rings.
Again, be sure to snug the screws, but don’t overtighten them. At this point, you will need to sight in the scope. The best way to do this is to go to a shooting range. Once you have the scope sighted in, you are ready to go hunting.
Henry X Model Scope & Cheek Rest Installation
Frequently Asked Questions
How do I mount a scope on a Henry Big Boy?
There are a few different ways that you can mount a scope on a Henry Big Boy, but the most common way is to use a set of scope rings. Scope rings are available in a variety of sizes and styles to fit any need, and they can be easily installed onto the gun. Once the scope rings are in place, you can then mount your scope onto the rings and tighten it down.
What type of scope can I use on a Henry Big Boy?
There are a variety of scopes that can be used on a Henry Big Boy, depending on the model and the intended use. For example, a red dot sight or a low-power scope may be well-suited for plinking or target practice, while a more powerful scope may be better suited for hunting or long-range shooting. Ultimately, it is up to the shooter to decide what type of scope will best suit their needs.
What are the benefits of mounting a scope on a Henry Big Boy?
Some benefits of mounting a scope on a Henry Big Boy include increased accuracy, longer range, and easier target acquisition. A scope can also help you shoot in low light conditions.
How do I sight in my scope once it is mounted on my Henry Big Boy?
There are a few different ways that you can sight in your scope once it is mounted on your Henry Big Boy. One way is to use a bore sight. This is a tool that you can use to align the scope with the bore of the gun. Another way is to shoot at a target from a distance and make adjustments to the scope until the crosshairs are lined up with the target.
Caution
When mounting a scope on a Henry Big Boy, it is important to be cautious so that the scope is mounted properly and securely. First, make sure that the rings are the correct size and that they are tightened properly. Second, be careful when tightening the screws that hold the scope in place.
Too much force can strip the threads or break the screws. Third, make sure that the scope is properly aligned with the bore of the rifle. Improper alignment can cause the scope to be off-center, which can affect accuracy. Finally, remember to test the rifle with the scope mounted before taking it out into the field.
Final Word
When mounting a scope on a Henry Big Boy, it is important to first make sure that the gun is unloaded. Next, it is necessary to remove the screws that hold the receiver cover in place so that the cover can be removed. With the cover removed, the next step is to remove the screws that hold the rear sight in place. Once the rear sight is removed, the next step is to mount the scope onto the gun. Finally, the screws that hold the receiver cover in place are replaced, and the gun is ready to be used.
Hey, This is Ebert Alberts. I’m the sole writer and creator of all the content you’ll find on this site. I’ve been passionate about shooting with scopes, red dot sights, and all kinds of gun optics for years now. And during that time, I’ve learned a lot – often the hard way. I’ve wasted thousands of dollars on scopes that turned out to be duds, and I’ve also found some real gems along the way.