How To Mount A Scope Marlin Glenfield Model 25

The Marlin Glenfield Model 25 is a .22 caliber, bolt-action, rimfire rifle that was manufactured by Marlin Firearms from 1972 to 1982. It was marketed as an inexpensive yet accurate plinking rifle. It is a popular gun among survivalists and is still used today for small game hunting and plinking. The Model 25 is also notable for being the first Marlin rifle to be equipped with a scope.

To disassemble a Marlin Glenfield model 25, first remove the magazine and make sure the chamber is empty. Then, remove the screws from the receiver cover and lift off the cover. Next, remove the screws from the receiver plug and remove the plug. Finally, remove the screws from the scope base and mount the scope.

Unload your firearm and make sure the chamber is clear. You will also want to remove the bolt from the rifle. Next, locate the two screws on the top of the receiver, in front of the rear sight. These screws are what hold the factory scope base in place. Using a screwdriver, remove these screws and save them for later. Next, take the new scope base and align it with the holes in the receiver. Once it is aligned, insert the screws that you removed earlier and tighten them in place. Be careful not to overtighten the screws, as this can strip the threads.

If you are looking to mount a scope on your Marlin Glenfield Model 25, the first thing you need to do is remove the bolt from the firearm. This will give you access to the receiver, which is where you will be attaching the scope. Once the bolt is removed, take a look at the receiver and locate the two holes that are drilled into it. These holes are for the scope mount screws.

Next, take the scope mount and align the holes on it with the holes on the receiver. Once the holes are aligned, insert the screws and tighten them down. Now, all you need to do is re-install the bolt and you are ready to go!

Place the scope base onto the receiver, making sure that the base is properly aligned. If the base is not properly aligned, the scope will not be able to track correctly and may become damaged. Once the base is aligned, tighten the screws to secure it in place.

Use the screws that come with the base to secure it in place. Make sure that the screws are tight so that the base will not move.

There are typically two rings that come with a scope base for a Marlin Glenfield Model 25. The first ring is placed on the scope base and then the second ring is placed over the first ring. Make sure that both rings are properly aligned before tightening them down.

Use the screws that come with the rings to secure them in place on the scope. Make sure that the screws are tight so that the scope will not move.

Insert the scope into the rings and make sure that it is properly seated. Next, align the scope with the bore of the rifle and tighten the rings. Finally, check to make sure that the scope is securely mounted and that there is no play in the rings.

Use a screwdriver to tighten the screws that secure the rings in place. Be careful not to over tighten the screws, which could strip the threads or damage the rings.

To mount a scope on a Marlin Glenfield Model 25 rifle, you will need to first remove the bolt and the magazine. Next, locate the two screws on the top of the receiver – these will be used to attach the scope mount. Once the screws are removed, you can then attach the scope mount to the receiver. Now, you will need to reassemble the bolt and the magazine. Once this is done, you can then load the firearm.

There are a few different ways that you can mount a scope on your Marlin Glenfield Model 25. You can either do it yourself or take it to a gunsmith to have it done. If you do it yourself, you will need to purchase a scope mount and then follow the instructions that come with it. If you take it to a gunsmith, they will be able to do it for you and make sure that it is mounted correctly.

There is no definitive answer to this question, as there are a variety of ways to mount a scope on a Marlin Glenfield Model 25. Some methods may be more suitable for certain types of scopes or for certain shooting applications. It is generally advisable to consult with a qualified gunsmith or firearms expert to determine the best way to mount a particular scope on your rifle.

One way is to use a bore sight. This is a tool that you can use to align the scope with the bore of the gun. This is a quick and easy way to get the scope close to being sighted in. Another way is to use a target. Set up the target at a known distance, and then adjust the scope until the crosshairs are lined up with the target. Shoot a few rounds, and then adjust the scope as needed until the bullets are hitting the target where you want them to.

There are a lot of different rings and bases out there that can be used to mount a scope on a Marlin Glenfield Model 25. It really depends on what you are looking for and what your budget is. Some good options to look into would be the Leupold QRW2 rings or the Burris Xtreme Tactical rings.

Some tips for mounting a scope on a Marlin Glenfield Model 25 would include making sure that the scope is properly aligned with the bore of the rifle, and that the rings are properly secured to the rifle. It is also important to make sure that the scope is properly sighted in before taking it out to shoot.

When mounting a scope on a Marlin Glenfield Model 25, it is important to take caution. The Model 25 is a lever-action rifle, which means that the scope will be mounted on the side of the receiver. It is important to make sure that the scope is mounted correctly, as it can easily become misaligned. Additionally, it is important to make sure that the screws that hold the scope in place are tight, as loose screws can cause the scope to become loose and fall off.

The Marlin Glenfield Model 25 is a great choice for anyone looking for a reliable and affordable scope. It is easy to mount and comes with all the necessary hardware. The scope is also very durable and can withstand the elements.