How To Mount Scope On Lee-Enfield

The Lee–Enfield is a British bolt-action, magazine-fed, repeating rifle that served as the main firearm used by the military forces of the British Empire and Commonwealth during the first half of the 20th century. It was the British Army’s standard rifle from its official adoption in 1895 until 1957.

A Lee–Enfield rifle was used by Sergeant Charles H. Upham, VC & Bar, of New Zealand, during World War II, to shoot down at least three German aircraft. The Lee–Enfield was also used by Arun Khetarpal of India, during the Indo-Pakistani War of 1971, to shoot down a Pakistani Patton tank.

The Lee–Enfield has been described as “one of the best service rifles ever produced”, and “a design that has never been equalled”. In 2007, the Lee–Enfield was voted the “greatest military rifle of all time” by a panel of 20 military historians commissioned by the BBC’s History Magazine.

To mount a scope on a Lee Enfield, first remove the original rear sight. Next, drill and tap two holes in the receiver for scope mounting screws. Install the scope base and rings, then mount the scope. Finally, zero the scope and test fire the rifle.

To mount a scope on a Lee Enfield rifle, first unscrew the scope mount from the rifle. Next, attach the scope mount to the rings, and then screw the rings onto the rifle. Finally, attach the scope to the mount.

To mount the scope on the Lee Enfield, first remove the rear sight by unscrewing the two screws that hold it in place. Next, slide the scope mount onto the top of the receiver and align the holes. Finally, screw in the two screws that came with the mount to secure it in place.

To mount the scope, first screw the scope mount into the rifle. Then, using the screws that come with the mount, attach the scope to the mount. Make sure that the screws are tight, but do not overtighten them. Once the scope is mounted, you will need to sight it in.

To mount a scope on a Lee Enfield rifle, first remove the rear sight by unscrewing the two screws that hold it in place. Next, attach the scope mount to the receiver using the screws that came with the mount. Once the mount is in place, you can then attach the scope to the mount. Finally, replace the rear sight by screwing it back in place.

To mount a scope on a Lee Enfield rifle, first screw the scope into the mount. Next, attach the mount to the rifle using the screws provided. Once the mount is attached, you can then attach the scope to the mount. Finally, tighten all screws to secure the scope in place.

After you have your scope mounted on your Lee Enfield, the next step is to sight in the scope. The first thing you need to do is to find a range where you can shoot at a distance of at least 100 yards. Once you have found a suitable range, set up your rifle on a shooting rest or a sandbag. If you don’t have a shooting rest or a sandbag, you can use anything that will support your rifle and keep it steady.

Next, you need to adjust the windage and elevation screws on your scope until the crosshairs are centered on the target. Once the crosshairs are centered, you can start shooting. Shoot a few shots at the target and make adjustments to the windage and elevation screws as needed. Once you are satisfied with the results, you can start hunting with your Lee Enfield.

There is no definitive answer to this question as the mount scope on lee enfield can vary depending on the specific model and year of manufacture. However, some general information on the mount scope on lee enfield is that it is typically used for long-range shooting and can be mounted on the top or side of the rifle. The mount scope on lee enfield can also be used for night vision or thermal imaging.

There are a few different ways that you can mount a scope on your lee enfield. One way is to use the existing scope mounting holes that are on the top of the receiver. Another way is to use a side mount scope base that attaches to the side of the receiver.

Some benefits of mounting a scope on a Lee Enfield rifle may include increased accuracy, longer range, and the ability to more easily identify targets. A scope can also help reduce recoil and make the rifle easier to control.

There is no definitive answer, and it depends on a number of factors such as what you will be using the rifle for, your personal preferences, and budget. Some factors to consider when choosing a scope for your Lee Enfield include:

-The intended use of the rifle (e.g. hunting, target shooting, plinking, etc.)

-The type of sights your rifle has (e.g. open sights, peep sights, etc.)

-The range you will be shooting at

-Your personal preferences (e.g. size, weight, reticle, etc.)

-Your budget

There are many different types and brands of scopes on the market, so it is important to do your research and find one that is best suited for your needs.

Make sure to clean the rifle regularly, paying special attention to the scope. Second, keep the rifle stored in a dry, safe place where it will not be exposed to excessive moisture or temperature changes. Third, take the rifle to a qualified gunsmith for regular maintenance and checkups. By following these simple steps, you can help ensure that your Lee Enfield rifle with a mounted scope will provide years of reliable service.

When mounting a scope on a Lee Enfield rifle, it is important to take caution. The Lee Enfield is a very powerful rifle, and when a scope is added, it can increase the power and accuracy of the rifle. If the scope is not mounted correctly, it can cause the rifle to malfunction and potentially injure the user or those around them.

It is important to follow the instructions carefully when mounting a scope on a Lee Enfield rifle, and to make sure that the scope is secure before using the rifle.

The Lee Enfield is a great rifle for anyone looking for a reliable and accurate gun. It is easy to mount a scope on this rifle, and with the right scope, it can be an extremely effective long range rifle. If you are looking for a good all around rifle, the Lee Enfield should be at the top of your list.