How To Mount Scope on Kel-Tec RFB

KelTec truly distinguishes out when it comes to cool-looking firearms. And there is no exemption for the RFB. KelTec not only makes cool-looking firearms, but they also strive for innovation in their goods. Kel-Tec’s goal with this rifle is to deliver a one-of-a-kind shooting experience. But there’s one thing I’ve observed with KelTec. Where their concepts are excellent, their implementation falls a bit short. The pistol does have a weird and cheap feel to it.

However, the RFB has several intriguing features worth highlighting. For starters, it features a distinct ejection port, similar to the RDB. Instead of ejecting expended casings downward, it projects them forward. This makes it great for either lefties or righties and, to say the least, incredibly entertaining to see in action.

We want to know how to attach a scope to a pistol, rifle, or shotgun for a variety of reasons. One reason is that having a red dot scope on a pistol helps you to readily identify your target. This is critical as you practice identifying and striking your target accurately.

If you spend some time on the range doing various target practice activities, the scope sight will assist you in swiftly finding that mark. Let’s have a look at how it’s done.

How To Mount A Scope on Kel-Tec RFB

Understanding how hard that recoil is with any handgun is vital when preparing to add a scope on top. If you are unfamiliar with purchasing mounts and scopes, you can bring your unloaded pistol in a case to a gun store to figure out what your alternatives are.

Even though the fact that you reload your ammo, the scope and mount you choose is determined by the brand of your firearm, frame size, and barrel length.

1. Taking Out Iron Sights

Mounting an optic or red dot sight on a semi-auto handgun is not the same as doing it on a revolver. Always consult your pistol handbook first to see which parts of the firearm must be removed and how to do it. First, unload your firearm. Put your pistol in a gun mount or vise so you can work on it easily.

2. Glock Dove-Tail Sight Removal

The removal of the dove-tail sight on a semi-automatic Glock handgun is straightforward. You’ll need decent sight removal equipment that uses opposing forces to move the dovetail rear sight out of its grove. To minimize any damage, it is best to disassemble your pistol first.

3. Set up the Mount Base

Insert the base of your scope’s sight mounts into the Glock’s rear sight groove. Check that the slide-in base is centered.

Add the mounting plate on top and secure the screws using Loctite blue thread sealer. To begin, use a manual screw to set the two screws. Then, using a torque wrench and a Phillips bit, return to seat both screws. Tighten to an 8-inch-pound grip.

4. Install the Sight

Position the little red dot sight over the base such that the holes correspond to the remaining two mount holes. Attach the screws with Loctite blue, following the same procedure as described before, and you’re done.

5. Removing Revolver Sights

First, remove the iron sight that the manufacturer installed on the pistol. Begin from the rear end sight assembly on top and remove the screw with a screwdriver, noting each turn click as you go. Leave the loosened screw, which is attached to a T-nut underneath, in place.

You’ll need to know the click amount in case you remove the optic later and replace it with the iron sight. You use the appropriate number of clicks to replace the screw.

You now proceed to unscrew the front screw. When done, your front end will rise from the frame. Gently press back on the front-end edge, sliding the iron sight backward out of its slots, until the entire assembly can be lifted off.

Set away the iron sight assembly in a secure location. A suitable location would be in the same location where you keep your firearms so you don’t lose them.

6. Prepare the Mount Location

The manufacturer has pre-drilled three 648-sized holes behind the iron sights on this RFB variant with an L frame. Inspect each hole for debris by inserting the front screw you just removed into each hole. If there is any debris inside, use a tap to remove it. Clean the holes using carburetor cleaner. Then air spray or blow it out to eliminate any remaining older pollutants.

Make careful you accomplish this since you will be using Loctite to properly set the new screws. For scope mounting, always use blue Loctite, never red. Choose one mount with built-in recoil lugs when purchasing a new scope. Recoil force is absorbed into the frame rather than being applied to the screws, which can damage your installation over time.

The mount should also feature a front sliding region that secures the scope in place with no room for movement. Insert a new Loctite into the holes.

7. Set up the Mount

The receiver (rail) mount should now fit neatly over the three drilled holes you just cleaned out and Loctite-prepared. Apply a dab of Loctite to the new screws before inserting them.

Insert the prepared screws into the three holes, using an Allen wrench to tighten but not overtighten them. Once they’re all the way in, use the Allen wrench to set each screw with a 1/8th turn. This type of scope mount installation is known as a Weaver mount application.

8. Handgun Scope Varieties

Now we’ll expand on the scope. When it comes to the sort of scope to acquire for a pistol, the options might be daunting. Select something lighter than what you’d put on a rifle or shotgun. When it comes to handgun recoil management, you don’t want to add too much weight. Some people use a scope that is the same length as the barrel, while others use a shorter scope.

Mounting The Scope in Another Approach

Consider what distances you are comfortable shooting at with a high proportion of success. When using a handgun, you are also further away from the scope.

When hunting, you normally hold the pistol out with straight arms, however, you can brace yourself against a sturdy resting ledge. Consider these issues, and you will be able to select the best scope for you and your pistol.

Mounting the scope is simple because most come with two mounting rings that fit over the mount. Check that these rings will fit the mount, and then proceed as follows:

Fit the lower half of the rings over the mount, then tighten the screw beneath to secure them.

Adjust the location of your scope by inserting it into the rings.

Place the top ring caps over the scope to meet the bottom rings, then screw the top to the bottom. Screw three to six rotations on each screw to tighten them in a sequence. Do this on one side from front to back, then move to the other side and repeat the action from front to back.

When both rings are snug against the recoil lug, tighten the screws until they reach the bottom. At this point, you may still spin the scope in situ.

The final step is to ensure that your scope is appropriately leveled. You may need to spin the scope, especially if it has precise dial knobs that aid in sighting. Once the mount and scope are in place, tighten the screws to hold them in place. As you twist the screw, listen for the click to determine when to stop.

Is the KelTec RFB dependable?

Yes, the rifle normally works fine, but if something goes wrong, you’re screwed. They also give some more materials to assist you in determining whether the RFB is the ideal Bullpup rifle for you.

When installing a scope, how much torque should I apply?

Screw Tightening. Follow the torque instructions provided with the mounts for a more exact torque adjustment, or use the following amounts: The torque setting for ring cap screws should be 16-inch pounds. Set the base screws to 30-inch pounds.

Is the RFB a shambles?

The RFB is a 7.62 NATO bullpup rifle that is ambidextrous. Southpaws will appreciate this small powerhouse’s revolutionary forward ejection mechanism, dual bolt release, left and right-side safety controls, and Ambi magazine release.

Conclusion

Mounting scope processes are largely the same across the board, with minor variations due to rifle brand, action type, and frame design. Your experienced firearms dealer may also recommend another type of mount that is better suited to the build of your firearm. Hope this article will help you to understand how to mount a scope on Kel-Tec RFB. Prepare to sight that scope now!