How To Mount A Scope On A Mossberg 702 Plinkster

A scope is an important accessory for a rifle, as it allows the user to more accurately target their shots. A scope can also be used to magnify the target, making it easier to hit. A scope is particularly important on a Mossberg 702 Plinkster, as the gun is designed for close-range shooting and does not have iron sights.

To disassemble a Mossberg 702 Plinkster, you will need to remove the factory sights. This can be done by drifting out the front sight post and unscrewing the rear sight assembly. Once the factory sights are removed, you will need to determine the scope base that is required.

The Plinkster uses a Weaver-style scope base. With the correct scope base installed, you can now mount your scope. It is important to remember to use loctite on all screws to prevent them from coming loose.

Unscrew the two screws on the top of the receiver, directly above the chamber. This will allow you to remove the receiver cover and access the bolt assembly. Next, remove the bolt assembly by pulling it to the rear and out of the receiver.

With the bolt assembly removed, you can now mount your scope onto the receiver using the appropriate rings. Once your scope is mounted, reassemble the bolt assembly and receiver cover, and screw the two receiver screws back in place.

To mount a scope on a Mossberg 702 Plinkster, remove the receiver cap, being careful not to lose the small spring and detent beneath it. Next, unscrew and remove the factory scope base. With the factory scope base removed, you can now install your aftermarket scope base. Once the aftermarket scope base is installed, you can now mount your scope.

With the holes lined up, insert the screws that will hold the base in place. Be sure to not overtighten the screws, as this can strip the threads or damage the finish on the receiver. With the base in place, your scope is now mounted and ready to be sighted in.

Using the screws that were removed in the first step, screw the base into place. Make sure that the base is tight and secure before moving on to the next step.

In order to mount a scope on a Mossberg 702 Plinkster, you will need to purchase a scope base and rings. Once you have these items, you will need to place the rings onto the scope base and screw them into place.

To mount a scope on a Mossberg 702 Plinkster, first insert the scope into the rings. Then, tighten down the screws to secure the scope in place. With the scope properly mounted, you’ll be able to more accurately shoot targets at long range.

Replace the receiver cap, being careful to line up the holes and not lose the spring and detent. The screws should be snug, but don’t overtighten them.

There are a few different ways that you can mount a scope on a Mossberg 702 Plinkster. One way is to use Weaver-style scope rings. Another way is to use a Picatinny rail.

There are a few different ways that people typically mount a scope on a Mossberg 702 Plinkster. Some people like to use a scope mount that attaches to the factory drilled and tapped holes on the top of the receiver, while others prefer to use a rail system that mounts to the receiver. Whichever method you choose, make sure that the mount is secure and that the scope is properly aligned before firing the gun.

There are a few things to keep in mind when mounting a scope on a Mossberg 702 Plinkster:

1. Make sure that the scope is properly aligned with the bore of the gun. This can be done by using a bore sighter.

2. It is important to use high-quality scope mounts and rings in order to ensure a secure connection between the scope and the gun.

3. Make sure that the scope is properly sighted in before taking it out to shoot. This can be done by using a shooting rest or sandbags.

There are a few different ways that you can sight in a scope on a Mossberg 702 Plinkster. One way is to use a bore sighter. This is a tool that you can use to align the scope with the bore of the gun. Another way is to use a laser sight. This is a tool that projects a dot onto the target. You can then adjust the scope until the dot is in the center of the crosshairs.

There is no definitive answer to this question as it depends on personal preferences and intended use. Some factors to consider when choosing a scope for a Mossberg 702 Plinkster include desired magnification, reticle type, and whether or not the scope is compatible with the gun’s existing iron sights.

When mounting a scope on a Mossberg 702 Plinkster, it is important to take caution in order to avoid damaging the firearm. It is recommended to use a gunsmith or someone with experience in order to properly mount the scope. Improperly mounting a scope can result in the scope being loose and moving around on the gun, which can be dangerous. It is also important to make sure that the scope is properly sighted in before using the gun.

If you’re looking to add a scope to your Mossberg 702 Plinkster, there are a few things you need to keep in mind. First, you’ll need to choose a scope that’s compatible with the Plinkster’s dovetail rail. Second, you’ll need to make sure that the scope is properly mounted and secured. And finally, you’ll want to take the time to sight in your scope so that you can make the most accurate shots possible. With a little bit of care and attention, you can easily add a scope to your Plinkster and take your shooting to the next level.